TCC-PBF-18-S-C33

Swivel clamp connector base for TCC-AP/TP-18, grey PA, INOX fasteners, no teeth

A termékkép illusztráció.

Manufacturer

ELESA+GANTER Austria GmbH.

Weight

24,00 g

Package quantity on stock

1 pcs

Package quantity over on stock

1 pcs

Stocked

pcs

ELESA+GANTER Austria GmbH. | TCC-PBF-18-S-C33 | Frame part

Last viewed products

Door positioning hinge, free operating, Acetal

Rear mounted grab handles 50 mm, steel, chrome plated, 50x25x35mm, th 2,0mm, hole 2x4,2mm

Guide tube (Avdel nG1/nG2/nG3/nG4)

Clamping bolt, top clamp, INOX, dia.50mm cam, clockwise clamping

Retained grip knob, male, black PA, for screwing with screwdriver, dia.20mm, M6x32mm INOX stud

Telescopic ball bearing slide, 100% ext., Front-disconnect, Hold-in, Self-close

Levelling foot, INOX, dia.120mm, M24x200mm stem, no rubber underlay, flat width

Compression spring, steel, Do=7,62mm, d=0,56mm, Lo=22,35mm

Compression spring, 316-os stainless steel, Do=12,19mm, d=1,88mm, Lo=22,35mm

Elastomer jaw coupling w clamp hub, alu, dia.55mm, dia.25/25mm keyway hole, blue spider 80 Shore A